KERROS Fire Panels

KERROS Fire Panels give the appearance of hand laid brick walls but with the convenience of easy installation and the benefit of huge cost savings.

PRODUCT INFORMATION:

  • Brick slips are pre-bonded to a composite 0.295 m2 Panel.
  • Thickness of Brick Slips & Panel together is 26 mm +/- 2 mm.
  • Rapid fixing, simply glue and screw.
  • Rear face of panel is flat and can be bonded to a variety of insulation materials.
  • No specialist skills or tools required.
  • Matching corners and singles are available to complete your project.
  • Temperature Range -40 to 150 Degrees Celsius.
  • One person installation.
  • Manufactured in the UK.

Standard Panels Per box: 0.9 m2 or 3 x panels.
Maximum boxes per pallet: 18 or 16.2 m2 (each pallet will incur a delivery fee).

For up to date trade prices we would recommend that you either call us on 01206 638039 or message us via our ‘Contact Us’ page.

Description

THIN CLADDING PANELS

Our composite thin cladding panels have been designed and manufactured in the UK.  The brick slips are bonded to class ‘O’ fire rated cement particle board, specially designed for fire walls and fireplace inserts.  Quick and easy to install, the panels are indistinguishable from traditional brickwork.

These fire resistant, high performance composite panels are engineered to be water, frost and heat resistant.  We are able to bond any type or colour of brick slip onto to the panels giving our customers full design flexibility.  FIre Inserts and panels to go behind log burners can be sized to specifications. These panels are a simple glue and screw installation.  We supply the linking brick slips and glue for bonding them.  All our customers have to do is point the slips when installed.

THIN CLADDING PANELS – FIRE PANELS BY DESIGN

A typical tradesman can fit around 8 m2 of loose brick slips a day.  With our thin cladding panels this could be as much as 40 m2.  If you factor in this rapid fitting time the panels are very much a cost effective option.

Once bonded and secured to a wall the brick slip facings are pointed.  This means there are no visible joints.  Our panels can withstand temperatures ranging between -40 to 150 degrees Celsius therefore are suitable behind log/wood burners, gas and electrical fires as well as external use in new builds or property face lifts.

If used to clad the outside of a property or internally for a feature wall, your project is sure to impress.

PRODUCT INFORMATION:

  • Brick slips are pre-bonded to a composite 0.295 m2 Panel.
  • Thickness of Brick Slips & Panel together is 26 mm +/- 2 mm.
  • Rapid fixing, simply glue and screw.
  • Rear face of panel is flat and can be bonded to a variety of insulation materials.
  • No specialist skills or tools required.
  • Matching corners and singles are available to complete your project.
  • Temperature Range -40 to 150 Degrees Celsius.
  • One person installation.
  • Manufactured in the UK.

Standard Panels Per box: 0.9 m2 or 3 x panels.
Maximum boxes per pallet: 18 or 16.2 m2 (each pallet will incur a delivery fee).

Coverage: Mainland UK (Quotes for pallet delivery fees for other areas of the UK, Europe and International destinations are available on request).

Typical delivery lead time for all UK deliveries is 2 – 3 weeks.

For all orders of Brick Slip Panels over 30 m2 please contact us as delivery lead times maybe longer than stated above.

Reviews

There are no reviews yet.

Be the first to review “KERROS Fire Panels”

Your email address will not be published. Required fields are marked *